Product Support
Welcome to Product Support. Enter your model number to retrieve manuals, frequently asked questions (FAQs), troubleshooting tips, and additional resources.
Need help finding your model number? Take a look here.
How To Find Your Model Number
Turn over the base of your product to locate the model number as illustrated in the image below.
Cordless Phone with Digital Answering System and Caller ID
T2351
Manuals & Documentation
Frequently Asked Questions
-
For message recording, your telephone has a Built-in answering system, and it also supports Voicemail service offered by your telephone service provider(subscription is required, and fee may apply).
The main differences between them are:
BUILT-IN ANSWERING SYSTEM VOICEMAIL SERVICE SUPPORTED BY Telephone system Telephone service provider SUBSCRIPTION No Yes FEES No May apply ANSWER INCOMING CALLS •After 3 rings by default.
•It can be changed via handset or the telephone base menu.•Usually after 2 rings.
•It can be changed by contacting your telephone service providerSTORAGE Telephone base Server or System DISPLAY NEW MESSAGE • Handset - XX new messages
• Telephone base - XX new messages• Handset - 
and New voicemail
• Telephone base -
RETRIEVE MESSAGES • Press PLAY/STOP on the telephone base; OR
• Press MENU, and then select Play messages on the handset; OR
•Access remotely with an access code• Press 
on the dialpad, and enter an access number from your telephone service provider.Based on the above information, if you want to...
Use the built-in answering system to record your messages
Your Voicemail service can bundle in your telephone plan. As such, you would need to contact your telephone service provider to disable it.
*TIP: Can I switch back to Voicemail service if I want to?
As long as your telephone plan includes the Voicemail service, you can still re-enable it through your service provider.Use the voicemail service to record your messages
Simply turn off the Built-in answering system at any time, and you can use the Voicemail service only.Use both the Built-in answering system and the Voicemail service to record messages
By default, the Voicemail service is usually set to answer after 2 rings, while your Built-in answering system is set after 3 rings. Please check with your telephone service provider to learn how to set your voicemail settings.Suggest to set your Built-in answering system to answer calls at least 2 rings earlier than your Voicemail service. In other words, if your answering system sets to answer after 3 rings (by default), then you need to set the Voicemail service to answer after 5 rings.
What happened is that if you on a call or the answering system is already recording, and you receive ANOTHER incoming call, then the third caller is able to leave a Voicemail message.
On the other hand, if you are not on a call nor the answering system is recording, the incoming caller can leave a message directly to the Built-in Answering system.
Why won’t the battery(s) in my telephone handset hold a charge?
-
Tip 1 of 4
Confirm proper installation of the telephone base power supply and handset battery. You should only use the VTech power supply provided with your telephone. Make sure the power supply is not connected to an electrical outlet that is controlled by a wall switch. Confirm that the electrical outlet that the telephone is plugged into is working. -
Tip 2 of 4
Make sure you are using the battery supplied with your phone. If you are replacing the battery and you need assistance, refer to our VTech Battery Finder. If a battery for your model is unavailable, you can search the internet using the key words cordless phone batteries for an on-line supplier. If you prefer to purchase locally, you can look for a replacement battery at your area consumer electronics retailers. It is recommended that you take your present battery with you to insure your replacement is the correct size and has the correct plug (where applicable) and specifications. -
Tip 3 of 4
When placing the handset in the charging base, confirm that the charge contacts on the handset and base are making a good connection. CHARGING... will display on the handset when it is properly charging.
You should allow 10-12 hours to fully charge the handset battery. For optimum daily performance, return the handset to its telephone base when not in use. -
Tip 4 of 4
You may need to replace the rechargeable battery, especially if it has been in service for more than one year. To find a replacement, refer to our VTech Battery Finder. If a battery for your model is unavailable, you can search the internet using the key words cordless phone batteries for an on-line supplier. If you prefer to purchase locally, you can look for a replacement battery at your area consumer electronics retailers. It is recommended that you take your present battery with you to insure your replacement is the correct size and has the correct plug (where applicable) and specifications.
The ringer on my phone is too loud or too soft. How do I adjust the ringer volume?
-
Tip 1 of 2
You can change the ringer type, or turn the ringer off completely. To change the ringer type, complete the following steps:
Step 1: Make sure the handset is idle (off).
Step 2: Press PROG.
Step 3: Press ▲ until the screen displays RINGER and the current setting.
Step 4: Press SELECT. The current setting blinks, and you will hear a sample of the ring.
Step 5: Press ▲ or ▼ to select RINGER:1, 2, 3, 4 or OFF. You will hear a sample of each ring.
Step 6: Press SELECT to choose the displayed ringer setting. -
Tip 2 of 2
You can turn the base ringer on or off:
Step 1: When the phone is not in use, press MENU on the base unit until you hear "Set Base Ringer."
Step 2: Press CHANGE to select ON or OFF.
Step 3: PressTIME/SET to confirm your selection.
Step 4: Press PLAY/STOP to exit programming mode.
Why doesn’t my telephone ring when I receive calls?
-
Tip 1 of 10
If the phone does not ring at all, you may have the ringer turned off. Select from one of the four predefined ring tones to turn the ringer on. To change the ringer type, complete the following steps:
Step 1: Make sure the handset is idle (off).
Step 2: Press PROG.
Step 3: Press ▲ until the screen displays RINGER and the current setting.
Step 4: Press SELECT. The current setting blinks, and you will hear a sample of the ring.
Step 5: Press ▲ or ▼ to select RINGER:1, 2, 3, 4 or OFF. You will hear a sample of each ring.
Step 6: Press SELECT to choose the displayed ringer setting. -
Tip 2 of 10
You can turn the base ringer on or off:
Step 1: When the phone is not in use, press MENU on the base unit until you hear "Set Base Ringer."
Step 2: Press CHANGE to select ON or OFF.
Step 3: PressTIME/SET to confirm your selection.
Step 4: Press PLAY/STOP to exit programming mode. -
Tip 3 of 10
Confirm proper installation of the telephone base power supply and handset battery. You should only use the VTech power supply provided with your telephone. Make sure the power supply is not connected to an electrical outlet that is controlled by a wall switch. Confirm that the electrical outlet that the telephone is plugged into is working. -
Tip 4 of 10
Move the handset closer to the base. The operating range may vary with environmental conditions and time of use. There may be places within your environment that a cordless phone will not work well. If the problem only occurs in certain areas of your environment, you can conclude that there is nothing wrong with the phone. Consider trying a phone that operates on a different wireless frequency. -
Tip 5 of 10
To get better reception, try moving the telephone base to higher location. Relocate telephone base near a window if using telephone outside. -
Tip 6 of 10
Other electronic products (i.e., 802.11 wireless networking products, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. -
Tip 7 of 10
If you have connected this telephone to a phone jack that has not been used before, or that has not been used in sometime, there may be problems with this jack that you are not aware of. Use a telephone jack that you know is in proper working order. -
Tip 8 of 10
If the handset is not responding normally, you may need to reset your telephone system. Complete the following steps to reset the telephone system:
Step 1: Disconnect the power to the telephone base.
Step 2: Disconnect the handset battery.
Step 3: Wait a few minutes and then reconnect the power to the telephone base.
Step 4: Reconnect the handset battery
Step 5: Wait about one minute for the handset to re-establish a link with the telephone base and then test the phone again.
NOTE: After resetting the telephone system, you will need to reset the clock. If the time is not set, CL will be shown on the answering system’s display.
NOTE: If you have caller ID service, the time will automatically be updated whenever caller ID information is delivered. However, since caller ID delivers the date, rather than the day, you must program the year once so the system can derive the day of the week.
To set the day and time, confirm that the answering system is turned on and then complete the following steps:
Step 1: Press TIME/SET. The system will announce the current setting.
Step 2: Press TIME/SET again. The system will announce the current day setting.
Step 3: Press CHANGE on the base until you hear the correct day.
Step 4: Press TIME/SET. The system will announce the current hour setting.
Step 5: Press CHANGE on the base until you hear the correct hour.
Step 6: Press TIME/SET. The system will announce the current minute setting.
Step 7: Press CHANGE on the base until you hear the correct minute.
NOTE: Pressing and holding the CHANGE button when setting the day and time will increase the minutes or years by 10.
Step 8: Press TIME/SET. The system will announce the current year setting.
Step 9: Press CHANGE on the base until you hear the correct year.
Step 10: Press TIME/SET to confirm. The system will announce the new day and time setting followed by a confirmation beep. -
Tip 9 of 10
When placing the handset in the charging base, confirm that the charge contacts on the handset and base are making a good connection. CHARGING... will display on the handset when it is properly charging.
You should allow 10-12 hours to fully charge the handset battery. For optimum daily performance, return the handset to its telephone base when not in use. -
Tip 10 of 10
If the other phones in your home are having the issue, the problem could be related to the telephone wiring in your home, or with your local telephone service. Please call your service provider for further assistance.
-
Tip 1 of 7
CONNECTING... is shown in the handset display window while the handset waits for the dial tone from the telephone base. It may take a second or two to get the handset and base to synchronize and produce a dial tone. -
Tip 2 of 7
Confirm proper installation of the telephone base power supply and handset battery. You should only use the VTech power supply provided with your telephone. Make sure the power supply is not connected to an electrical outlet that is controlled by a wall switch. Confirm that the electrical outlet that the telephone is plugged into is working. -
Tip 3 of 7
When placing the handset in the charging base, confirm that the charge contacts on the handset and base are making a good connection. CHARGING... will display on the handset when it is properly charging.
You should allow 10-12 hours to fully charge the handset battery. For optimum daily performance, return the handset to its telephone base when not in use. -
Tip 4 of 7
Move the handset closer to the base. The operating range may vary with environmental conditions and time of use. There may be places within your environment that a cordless phone will not work well. If the problem only occurs in certain areas of your environment, you can conclude that there is nothing wrong with the phone. Consider trying a phone that operates on a different wireless frequency. -
Tip 5 of 7
To get better reception, try moving the telephone base to higher location. Relocate telephone base near a window if using telephone outside. -
Tip 6 of 7
Other electronic products (i.e., 802.11 wireless networking products, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. -
Tip 7 of 7
If the handset is not responding normally, you may need to reset your telephone system. Complete the following steps to reset the telephone system:
Step 1: Disconnect the power to the telephone base.
Step 2: Disconnect the handset battery.
Step 3: Wait a few minutes and then reconnect the power to the telephone base.
Step 4: Reconnect the handset battery
Step 5: Wait about one minute for the handset to re-establish a link with the telephone base and then test the phone again.
NOTE: After resetting the telephone system, you will need to reset the clock. If the time is not set, CL will be shown on the answering system’s display.
NOTE: If you have caller ID service, the time will automatically be updated whenever caller ID information is delivered. However, since caller ID delivers the date, rather than the day, you must program the year once so the system can derive the day of the week.
To set the day and time, confirm that the answering system is turned on and then complete the following steps:
Step 1: Press TIME/SET. The system will announce the current setting.
Step 2: Press TIME/SET again. The system will announce the current day setting.
Step 3: Press CHANGE on the base until you hear the correct day.
Step 4: Press TIME/SET. The system will announce the current hour setting.
Step 5: Press CHANGE on the base until you hear the correct hour.
Step 6: Press TIME/SET. The system will announce the current minute setting.
Step 7: Press CHANGE on the base until you hear the correct minute.
NOTE: Pressing and holding the CHANGE button when setting the day and time will increase the minutes or years by 10.
Step 8: Press TIME/SET. The system will announce the current year setting.
Step 9: Press CHANGE on the base until you hear the correct year.
Step 10: Press TIME/SET to confirm. The system will announce the new day and time setting followed by a confirmation beep.
Why is SCANNING... shown in the handset display window?
- SCANNING... is shown in the handset display window when the phone is changing to one of the 30 available channels.
Why can’t I program numbers in the telephone’s directory?
-
Tip 1 of 2
The telephone is capable of storing a total of 10 entries in the directory. Each entry can contain up to 15 characters for the name and 24 digits for the telephone number. When programming the entries, the telephone must be on-hook (turned off).
If the memory is full, the screen will display MEMORY FULL, and an error tone will sound. You will not be able to store a new number until a stored number is deleted.
To program an entry in the directory, complete the following steps:
Step 1: Press PROG. The screen will display DIRECTORY.
Step 2: Press SELECT. The screen will display ENTER NAME.
Step 3: Using the keypad, enter the name of the contact. Use the ▼ key to backspace and make corrections; use the ▲ key to advance and add a space. For more information on entering names with the keypad, please review the section of the user’s manual that covers Speed dial and the Directory.
Step 4: When you finish entering the name, press SELECT. The screen will display ENTER NUMBER.
Step 5: Enter the telephone number. Use the ▼ key to backspace and make corrections.
Press REDIAL/PAUSE if you wish to display and store the last number dialed.
-OR-
Press REDIAL/PAUSE to store a pause in the dialing sequence.
Step 6: Press SELECT. The screen will display DISTINCT RING? along with the current setting.
Step 7: Press the ▲ or ▼ key to change the setting. Choose Y (for yes) if you want the telephone to alert you to calls from this number by changing to a distinctive ring pattern after the first ring. Choose N (for no) for a normal ringing pattern.
Step 8: Press SELECT to confirm your selection. If you chose Y, a D (for distinct ring) will be displayed with the directory entry. -
Tip 2 of 2
Unplug the battery from the handset. After 15 seconds, plug the battery in and recradle the handset in the base for 1minute. Try using the handset again.
Why does the screen display MEMORY FULL when I try to save an entry to the directory?
-
The telephone is capable of storing a total of 10 entries in the directory. Each entry can contain up to 15 characters for the name and 24 digits for the telephone number. When programming the entries, the telephone must be on-hook (turned off).
If the memory is full, the screen will display MEMORY FULL, and an error tone will sound. You will not be able to store a new number until a stored number is deleted.
To program an entry in the directory, complete the following steps:
Step 1: Press PROG. The screen will display DIRECTORY.
Step 2: Press SELECT. The screen will display ENTER NAME.
Step 3: Using the keypad, enter the name of the contact. Use the ▼ key to backspace and make corrections; use the ▲ key to advance and add a space. For more information on entering names with the keypad, please review the section of the user’s manual that covers Speed dial and the Directory.
Step 4: When you finish entering the name, press SELECT. The screen will display ENTER NUMBER.
Step 5: Enter the telephone number. Use the ▼ key to backspace and make corrections.
Press REDIAL/PAUSE if you wish to display and store the last number dialed.
-OR-
Press REDIAL/PAUSE to store a pause in the dialing sequence.
Step 6: Press SELECT. The screen will display DISTINCT RING? along with the current setting.
Step 7: Press the ▲ or ▼ key to change the setting. Choose Y (for yes) if you want the telephone to alert you to calls from this number by changing to a distinctive ring pattern after the first ring. Choose N (for no) for a normal ringing pattern.
Step 8: Press SELECT to confirm your selection. If you chose Y, a D (for distinct ring) will be displayed with the directory entry.
-
Tip 1 of 8
Since your cordless phone operates like a radio, there may be places within your environment where it may not perform as well as in other areas. In this case, there is nothing wrong with your phone. Try changing the channel while on a call with lots of static. To change the channel, press the CHAN button until the interference has been eliminated. -
Tip 2 of 8
If you subscribe to DSL service for this telephone line, DSL filters must be plugged into EVERY phone jack that has a phone. The DSL signal can cause static/noise, squealing (similar to fax tones), caller ID disruption and other issues on your line. DSL filters block the high frequency DSL signals from being transmitted to the telephone. If you are not using the DSL filters provided by the telephone company, this will cause static/noise and possibly caller id issues on your phones.
In most cases, we recommend you connect the plug end of the DSL filter into the telephone jack, then connect a telephone cord between the filter and your phone.
Please contact your service provider to obtain DSL filters and installation information. -
Tip 3 of 8
Move the handset closer to the base. The operating range may vary with environmental conditions and time of use. There may be places within your environment that a cordless phone will not work well. If the problem only occurs in certain areas of your environment, you can conclude that there is nothing wrong with the phone. Consider trying a phone that operates on a different wireless frequency. -
Tip 4 of 8
To get better reception, try moving the telephone base to higher location. Relocate telephone base near a window if using telephone outside. -
Tip 5 of 8
Other electronic products (i.e., 802.11 wireless networking products, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. -
Tip 6 of 8
If your phone shares a power outlet with a modem, or if it is plugged in to a shared surge protector, try plugging the phone (or modem/surge protector) in at a different location. If this solves the problem, re-locate your phone or modem farther apart from one another, or use separate surge protectors. -
Tip 7 of 8
If you have connected this telephone to a phone jack that has not been used before, or that has not been used in sometime, there may be problems with this jack that you are not aware of. Use a telephone jack that you know is in proper working order. -
Tip 8 of 8
If the other phones in your home are having the issue, the problem could be related to the telephone wiring in your home, or with your local telephone service. Please call your service provider for further assistance.
My telephone handset appears to be dead. What should I do?
-
Tip 1 of 6
If your handset responds in any way (beeps, displays information on the screen, etc.) then it is not dead. Please review the Frequently Asked Questions list to find a symptom which better describes your problem. -
Tip 2 of 6
Make sure you are using the battery supplied with your phone. If you are replacing the battery and you need assistance, refer to our VTech Battery Finder. If a battery for your model is unavailable, you can search the internet using the key words cordless phone batteries for an on-line supplier. If you prefer to purchase locally, you can look for a replacement battery at your area consumer electronics retailers. It is recommended that you take your present battery with you to insure your replacement is the correct size and has the correct plug (where applicable) and specifications. -
Tip 3 of 6
When placing the handset in the charging base, confirm that the charge contacts on the handset and base are making a good connection. The CHARGE light on the telephone base will be on when the handset is charging.
You should allow 12 hours to fully charge the handset battery. For optimum daily performance, return that handset to its telephone base when not in use. -
Tip 4 of 6
Recradle the handset for 15 seconds, then lift the handset and press PHONE. -
Tip 5 of 6
If the handset is not responding normally, you may need to reset your telephone system. Complete the following steps to reset the telephone system:
Step 1: Disconnect the power to the telephone base.
Step 2: Disconnect the handset battery.
Step 3: Wait a few minutes and then reconnect the power to the telephone base.
Step 4: Reconnect the handset battery
Step 5: Wait about one minute for the handset to re-establish a link with the telephone base and then test the phone again.
NOTE: After resetting the telephone system, you will need to reset the clock. If the time is not set, CL will be shown on the answering system’s display.
NOTE: If you have caller ID service, the time will automatically be updated whenever caller ID information is delivered. However, since caller ID delivers the date, rather than the day, you must program the year once so the system can derive the day of the week.
To set the day and time, confirm that the answering system is turned on and then complete the following steps:
Step 1: Press TIME/SET. The system will announce the current setting.
Step 2: Press TIME/SET again. The system will announce the current day setting.
Step 3: Press CHANGE on the base until you hear the correct day.
Step 4: Press TIME/SET. The system will announce the current hour setting.
Step 5: Press CHANGE on the base until you hear the correct hour.
Step 6: Press TIME/SET. The system will announce the current minute setting.
Step 7: Press CHANGE on the base until you hear the correct minute.
NOTE: Pressing and holding the CHANGE button when setting the day and time will increase the minutes or years by 10.
Step 8: Press TIME/SET. The system will announce the current year setting.
Step 9: Press CHANGE on the base until you hear the correct year.
Step 10: Press TIME/SET to confirm. The system will announce the new day and time setting followed by a confirmation beep. -
Tip 6 of 6
You may need to replace the rechargeable battery, especially if it has been in service for more than one year. To find a replacement, refer to our VTech Battery Finder. If a battery for your model is unavailable, you can search the internet using the key words cordless phone batteries for an on-line supplier. If you prefer to purchase locally, you can look for a replacement battery at your area consumer electronics retailers. It is recommended that you take your present battery with you to insure your replacement is the correct size and has the correct plug (where applicable) and specifications.
The information shown on the handset display is garbled. How do I fix it?
-
Tip 1 of 2
Recradle the handset for 15 seconds, then lift the handset and press PHONE. -
Tip 2 of 2
Unplug the battery from the handset. After 15 seconds, plug the battery in and recradle the handset in the base for 1minute. Try using the handset again.
The handset beeps five times and is not performing normally. What should I do?
-
Tip 1 of 6
Move the handset closer to the base. The operating range may vary with environmental conditions and time of use. There may be places within your environment that a cordless phone will not work well. If the problem only occurs in certain areas of your environment, you can conclude that there is nothing wrong with the phone. Consider trying a phone that operates on a different wireless frequency. -
Tip 2 of 6
Make sure that the power cord is securely plugged into the base and electrical outlet. Make sure the electrical outlet is not controlled by a wall switch. -
Tip 3 of 6
Recradle the handset for 15 seconds, then lift the handset and press PHONE. -
Tip 4 of 6
If the handset is not responding normally, you may need to reset your telephone system. Complete the following steps to reset the telephone system:
Step 1: Disconnect the power to the telephone base.
Step 2: Disconnect the handset battery.
Step 3: Wait a few minutes and then reconnect the power to the telephone base.
Step 4: Reconnect the handset battery
Step 5: Wait about one minute for the handset to re-establish a link with the telephone base and then test the phone again.
NOTE: After resetting the telephone system, you will need to reset the clock. If the time is not set, CL will be shown on the answering system’s display.
NOTE: If you have caller ID service, the time will automatically be updated whenever caller ID information is delivered. However, since caller ID delivers the date, rather than the day, you must program the year once so the system can derive the day of the week.
To set the day and time, confirm that the answering system is turned on and then complete the following steps:
Step 1: Press TIME/SET. The system will announce the current setting.
Step 2: Press TIME/SET again. The system will announce the current day setting.
Step 3: Press CHANGE on the base until you hear the correct day.
Step 4: Press TIME/SET. The system will announce the current hour setting.
Step 5: Press CHANGE on the base until you hear the correct hour.
Step 6: Press TIME/SET. The system will announce the current minute setting.
Step 7: Press CHANGE on the base until you hear the correct minute.
NOTE: Pressing and holding the CHANGE button when setting the day and time will increase the minutes or years by 10.
Step 8: Press TIME/SET. The system will announce the current year setting.
Step 9: Press CHANGE on the base until you hear the correct year.
Step 10: Press TIME/SET to confirm. The system will announce the new day and time setting followed by a confirmation beep. -
Tip 5 of 6
Other electronic products (i.e., 802.11 wireless networking products, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. -
Tip 6 of 6
To get better reception, try moving the telephone base to higher location. Relocate telephone base near a window if using telephone outside.
Why can’t people hear me when I’m using this telephone?
-
Tip 1 of 11
Move the handset closer to the base. The operating range may vary with environmental conditions and time of use. There may be places within your environment that a cordless phone will not work well. If the problem only occurs in certain areas of your environment, you can conclude that there is nothing wrong with the phone. Consider trying a phone that operates on a different wireless frequency. -
Tip 2 of 11
Try changing the channel while on a call with a lot of static. To change the channel, press the CHAN/DELETE button until the interference has been eliminated. -
Tip 3 of 11
Other electronic products (i.e., 802.11 wireless networking products, radios, radio towers, pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices. -
Tip 4 of 11
Using one or more extensions on the same call can draw additional line voltage. Due to differences amongst telephones and line conditions, use of an extension cannot be guaranteed. -
Tip 5 of 11
Make sure that the mouth piece is unobstructed. Avoid placing your fingers or any stickers over the microphone, located near the bottom of the handset. -
Tip 6 of 11
You may have a defective telephone cord. Try replacing cord between the jack and telephone base. -
Tip 7 of 11
Recradle the handset for 15 seconds, then lift the handset and press PHONE. -
Tip 8 of 11
Unplug the battery from the handset. After 15 seconds, plug the battery in and recradle the handset in the base for 1minute. Try using the handset again. -
Tip 9 of 11
If the handset is not responding normally, you may need to reset your telephone system. Complete the following steps to reset the telephone system:
Step 1: Disconnect the power to the telephone base.
Step 2: Disconnect the handset battery.
Step 3: Wait a few minutes and then reconnect the power to the telephone base.
Step 4: Reconnect the handset battery
Step 5: Wait about one minute for the handset to re-establish a link with the telephone base and then test the phone again.
NOTE: After resetting the telephone system, you will need to reset the clock. If the time is not set, CL will be shown on the answering system’s display.
NOTE: If you have caller ID service, the time will automatically be updated whenever caller ID information is delivered. However, since caller ID delivers the date, rather than the day, you must program the year once so the system can derive the day of the week.
To set the day and time, confirm that the answering system is turned on and then complete the following steps:
Step 1: Press TIME/SET. The system will announce the current setting.
Step 2: Press TIME/SET again. The system will announce the current day setting.
Step 3: Press CHANGE on the base until you hear the correct day.
Step 4: Press TIME/SET. The system will announce the current hour setting.
Step 5: Press CHANGE on the base until you hear the correct hour.
Step 6: Press TIME/SET. The system will announce the current minute setting.
Step 7: Press CHANGE on the base until you hear the correct minute.
NOTE: Pressing and holding the CHANGE button when setting the day and time will increase the minutes or years by 10.
Step 8: Press TIME/SET. The system will announce the current year setting.
Step 9: Press CHANGE on the base until you hear the correct year.
Step 10: Press TIME/SET to confirm. The system will announce the new day and time setting followed by a confirmation beep. -
Tip 10 of 11
If you have connected this telephone to a phone jack that has not been used before, or that has not been used in sometime, there may be problems with this jack that you are not aware of. Use a telephone jack that you know is in proper working order. -
Tip 11 of 11
If the other phones in your home are having the issue, the problem could be related to the telephone wiring in your home, or with your local telephone service. Please call your service provider for further assistance.
Why am I not receiving caller ID on my phone?
-
Caller ID and Call Waiting ID are subscription services, available from most local telephone service providers. You must subscribe to these services in order for the features to work on your phone. Contact your local telephone service provider for more information.
In addition, your caller must be calling from an area that supports caller ID.
Both you and your caller’s telephone service provider must use compatible caller ID systems.
If you subscribe to DSL service for this telephone line, DSL filters must be plugged into EVERY phone jack that has a phone. The DSL signal can cause caller ID disruption, static, noise and other issues on your line. DSL filters block the high frequency DSL signals from being transmitted to the telephone. If you are not using the DSL filters provided by the telephone company, this will cause static/noise and possibly caller id issues on your phones.
In most cases, we recommend you connect the plug end of the DSL filter into the telephone jack, then connect a telephone cord between the filter and your phone.
Please contact your service provider to obtain DSL filters and installation information.
Caller ID and Call Waiting ID may not be available for every call. Common reasons are incompatibilities between your and your caller’s service, transmission errors and answering calls before the ID data is received.
How can I improve the sound quality on my cordless phone?
-
If your handset has a CHANNEL (or CHAN) button, press it in order to improve the sound quality. You may need to press the CHANNEL button more than once.
The handset may be out of range. Try moving closer to the base. The handset(s) and base can only communicate over a certain distance which can vary with their placement, the weather and the operating environment of your home/office.
If you subscribe to DSL service for this telephone line, DSL filters must be plugged into EVERY phone jack that has a phone. The DSL signal can cause static/noise, squealing (similar to fax tones), caller ID disruption and other issues on your line. DSL filters block the high frequency DSL signals from being transmitted to the telephone. If you are not using the DSL filters provided by the telephone company, this will cause static/noise and possibly caller id issues on your phones.
In most cases, we recommend you connect the plug end of the DSL filter into the telephone jack, then connect a telephone cord between the filter and your phone.
Please contact your service provider to obtain DSL filters and installation information.
A low battery pack may affect the sound quality. You may need to charge the handset. Also, try repositioning the handset against your ear until the sound quality improves.
Electronic products (i.e., 802.11 wireless networks, radios, radio and pager towers, cell phones, intercoms, room monitors, televisions, personal computers, kitchen appliances and other cordless phones) can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.
Appliances or other cordless phones plugged into the same circuit as the telephone base can cause interference. Try moving the appliances or telephone base to another outlet.
Microwave ovens may operate on the same frequency as your telephone. You may experience static on your telephone while the microwave oven is operating. Do not install your cordless telephone in the same outlet or near the microwave oven.
Disconnect the telephone base from the modular jack and plug in a corded telephone. If calls are still not clear, the problem is probably in the wiring or local service. Contact your local service company (charges may apply).
If your phone shares a power outlet with a modem, or if it is plugged into a shared surged protector, try plugging in the phone (or modem/surge protector) at a different location. If this solves the problem, relocate your phone and modem farther apart from each other, or use separate surge protectors.
The layout of your home or office may be limiting the operating range. Try moving the base to another location, preferably a higher location for better reception. If your telephone base has an adjustable antenna, ensure it is pointing up.
Why isn’t CHARGING... shown on the telephone display when I place the handset in the base?
-
Tip 1 of 7
Please make sure that the cords (power and telephone line) are plugged into the channels on the bottom of the base. If the cords are not properly installed, the base will not sit level and the phone may not charge properly. -
Tip 2 of 7
Dirty charge contacts on the telephone base and handset could prevent the batteries from charging. Clean the handset and base charge contacts using a pencil eraser or a cloth to eliminate deposit accumulation. -
Tip 3 of 7
Confirm proper installation of the telephone base power supply and handset battery. You should only use the VTech power supply provided with your telephone. Make sure the power supply is not connected to an electrical outlet that is controlled by a wall switch. Confirm that the electrical outlet that the telephone is plugged into is working. -
Tip 4 of 7
Make sure that the battery cover is properly secured on the handset. If the battery cover is not correctly installed, it may prevent the handset from charging. -
Tip 5 of 7
When placing the handset in the charging base, confirm that the charge contacts on the handset and base are making a good connection. CHARGING... will display on the handset when it is properly charging.
You should allow 10-12 hours to fully charge the handset battery. For optimum daily performance, return the handset to its telephone base when not in use. -
Tip 6 of 7
If you have multiple cordless hadsets, ensure you are using the correct charging base for this particular handset. -
Tip 7 of 7
If the handset is not responding normally, you may need to reset your telephone system. Complete the following steps to reset the telephone system:
Step 1: Disconnect the power to the telephone base.
Step 2: Disconnect the handset battery.
Step 3: Wait a few minutes and then reconnect the power to the telephone base.
Step 4: Reconnect the handset battery
Step 5: Wait about one minute for the handset to re-establish a link with the telephone base and then test the phone again.
NOTE: After resetting the telephone system, you will need to reset the clock. If the time is not set, CL will be shown on the answering system’s display.
NOTE: If you have caller ID service, the time will automatically be updated whenever caller ID information is delivered. However, since caller ID delivers the date, rather than the day, you must program the year once so the system can derive the day of the week.
To set the day and time, confirm that the answering system is turned on and then complete the following steps:
Step 1: Press TIME/SET. The system will announce the current setting.
Step 2: Press TIME/SET again. The system will announce the current day setting.
Step 3: Press CHANGE on the base until you hear the correct day.
Step 4: Press TIME/SET. The system will announce the current hour setting.
Step 5: Press CHANGE on the base until you hear the correct hour.
Step 6: Press TIME/SET. The system will announce the current minute setting.
Step 7: Press CHANGE on the base until you hear the correct minute.
NOTE: Pressing and holding the CHANGE button when setting the day and time will increase the minutes or years by 10.
Step 8: Press TIME/SET. The system will announce the current year setting.
Step 9: Press CHANGE on the base until you hear the correct year.
Step 10: Press TIME/SET to confirm. The system will announce the new day and time setting followed by a confirmation beep.
-
Despite your VoIP box shows full signal strength, there could still be no dial tone/ display Line in Use/ etc. This may due to the abnormality of signal and voltage levels. Follow this short video to reset your VoIP box and its connected devices.
(For non-IS8151 series - all other models) https://www.youtube.com/watch?v=mXbXl4froUc&t=25s
(For IS8151-X series) https://www.youtube.com/watch?v=rJ9PNkwBzfE&t=3s
[Background]
• VoIP box connected via SIM/ LAN connection.
• Some VoIP boxes have displays and some not. While displays show steady ON and ready, you might still experience with no dial tone sound/ display Line in Use.[To Reset]
• Some Power off button does not fully power off the unit. It only put the VoIP box in standby mode. To truly power off, unplug the power adapter of your VoIP box.
• Disconnect all devices from the box. After a moment, reconnect your power adapter, and then press power button to turn ON.
• Wait until the VoIP box is steady ON and ready.
• Connect your telephone cable from your Telephone base to your VoIP box.REMINDER!!!
• Make sure you didn't connect the telephone cable from the Telephone wall outlet to VoIP box telephone port!!! Doing so will not damage the device, but it will affect the call function and becomes unusable. This is why you experience no dial tone, Line in Use with busy tone, etc.
• During power outage, your landline phone will not be available since it requires external electric power despite your VoIP box has a backup battery.If this situation persists, contact your VoIP / VoIP box service provider for further support.